fbpx

Systems installs and commissions new Spray-Cooled™ Electric Arc Furnace (EAF) equipment and a complete engineering package at EVRAZ Steel

February 2022 Nashville, TN – The SYSTEMS Group, received an order from EVRAZ North America, for the installation of Spray-Cooled™ equipment at its steelmaking facility located in Pueblo, Colorado.  The 2022 turn key project includes new spray-cooled Electric Arc Furnace (EAF) equipment and a complete engineering package that covers a laser scan of the entire

2022-03-17T15:00:28-05:00February 10th, 2022|Spray-Cooled™, The Systems Group|

Systems installs and commissions new Spray-Cooled™ Gravity Drained EAF Roof at Optimus Steel

February 2022 Nashville, TN – As part of its mill modernization upgrade that was completed last month, Optimus Steel, Beaumont, TX installed and commissioned a new Spray-Cooled™ electric arc furnace (EAF) roof and elbow with Systems Spray-Cooled. The design-build-install project includes a new EAF roof, elbow, engineering, laser scans, and accompanying equipment that will replace

2022-03-16T11:14:06-05:00February 1st, 2022|Spray-Cooled™, The Systems Group|

Ovako Hofors Puts Safety at the Forefront with the First Spray-Cooled™ EAF Roof in the Nordic Region

July 24, 2017, El Dorado, Arkansas – Swedish steel producer Ovako has awarded Systems Spray-Cooled the contract to modernize and increase safety on their Electric Arc Furnace (EAF) with the first Spray-Cooled™ roof in the Nordic region, located at their bar, billet, tube, and rings facility in Hofors, Sweden. After first being exposed to Spray-Cooled

2021-11-23T13:16:05-06:00November 23rd, 2021|Spray-Cooled™, The Systems Group|

Systems Spray-Cooled installs and commissions a new Spray-Cooled™ EAF Roof and Elbow at Industeel Belgium

ArcelorMittal Industeel Belgium (“Industeel”) has installed and successfully commissioned a new Spray-Cooled™ Electric Arc Furnace (EAF) Roof and Elbow with Systems Spray-Cooled of The System Group.

2021-11-23T13:02:37-06:00June 25th, 2021|Spray-Cooled™, The Systems Group|

Systems Spray-Cooled Recently Completes BRS Phase II Melt Shop Expansion

As part of its Phase Two expansion that was recently completed, Big River Steel in Osceola, Arkansas installed and commissioned new Spray-Cooled™ on furnace electric arc furnace (EAF) equipment including a roof, elbow, sidewall and off-gas duct work with Systems Spray-Cooled from The Systems Group.

2021-11-23T13:07:29-06:00May 2nd, 2021|Spray-Cooled™, The Systems Group|

Systems Spray-Cooled receives contract from Nucor Steel Brandenburg

Systems Spray-Cooled™, of The Systems Group, was selected to supply the electric arc furnace (EAF) Spray-Cooled™ equipment to Nucor Corporation’s new plate mill in Brandenburg, KY.  The new EAF greenfield project includes equipment for a single EAF operation. 

2021-11-23T13:08:38-06:00December 6th, 2020|Spray-Cooled™, The Systems Group|

Systems Spray-Cooled Delivers Equipment to Nucor Steel Gallatin

Systems Spray-Cooled Delivers Equipment to Nucor Steel Gallatin September 2020 Nashville, TN --Nucor Steel is expanding the steelmaking capacity at its flat-rolled sheet steel mill located in Ghent, KY.  As part of the expansion project, Nucor is adding a new 175-ton EAF that will increase the mill’s annual capacity from 1.6 million tons to approximately

2021-11-23T13:10:45-06:00September 15th, 2020|Spray-Cooled™, The Systems Group|

Systems Spray-Cooled receives an order to upgrade Optimus Steel EAF

Systems Spray-Cooled receives an order to upgrade Optimus Steel EAF July 2020 Nashville, TN -- Optimus Steel has placed an order for a furnace upgrade solution with Systems Spray-Cooled of The Systems Group.  The 4th quarter 2020 turn-key project includes a new Spray-Cooled™ Electric Arc Furnace (EAF) Roof, a new Spray-Cooled™ Elbow, the accompanying equipment that will replace

2021-11-23T13:11:19-06:00July 1st, 2020|Spray-Cooled™, The Systems Group|

Systems Spray-Cooled receives order from Steel Dynamics, Inc.

Systems Spray-Cooled receives order from Steel Dynamics, Inc. June 2020 Nashville, TN --Systems Spray-Cooled has received an order from Steel Dynamics, Inc. for Spray-Cooled™ equipment at their new mill in Sinton, TX currently under construction.   The 2021 project includes equipment for their (2) Electric Arc Furnaces.  The Spray-Cooled™ equipment will cover 100% of SDI’s furnace

2021-11-23T13:11:50-06:00June 1st, 2020|Spray-Cooled™, The Systems Group|

The Systems Group Named a Top Specialty Contractor

Arkansas Company #350 in 2019 ENR Top 600 Specialty Contractors Ranking El Dorado, Ark., October 2019 – The Systems Group (tsg.bz), a leading specialty contractor serving the industrial market with a focus on steel mills, has been named one of the Top 600 Specialty Contractors nationwide in an annual ranking report released by Engineering News-Record (ENR), a

Go to Top